Okay I'm stupid, how do I setup a Blue tooth?

[Datajack Franit]

Much better. The laptop can become a Bluetooth receiver simply by putting this little thing in your USB drive




It costs like 15€. Most laptops nowadays have a bluetooth receiver already installed inside them.

In order to make your handset work, you have to be sure that both systems are researching Bluetooth networks. Some headset can be activated by pressing the Bluetooth connection button until the blue light switches to red, but your model may be different after all. When you find out how to do it, link the headseat to your phone. It's very important, if you don't want to repeat the whole thing again. If it asks for a password, it's usually either 12345 or 0000. That's all.

[Pekka]

The reason why there are no instructions is because you just turn both devices on and activate bluetooth. This is why people call you Sir. You know, stupid customer questions .

[Dis]

yeah I've been doing that. I'm thinking the guy at the store gave me the wrong model.

[Fake Boris]

You turn on Bluetooth on your phone. That is, huh, somewhere in the settings.

Then you somehow activate your headphones and tell it to connect to the phone.

That's it.

[Tim_Augustus]

Originally posted by Oncle Boris
You turn on Bluetooth on your phone. That is, huh, somewhere in the settings.

Then you somehow activate your headphones and tell it to connect to the phone.

That's it.

This is what you need to do:

Go to the main menu of the phone, select connections -> bluetooth -> setup -> bluetooth power = on

Then you need to activate the 'find me' function of the headset - usually you do this by holding the power button for several seconds - the status light will usually flash in a special way (eg alternating colours, rapid flashing, etc - it stays in this state for 30 secs or so or until it connects to a device) - this allows the headset to be found by other bluetooth devices. Your phone should then detect the headset and request a PIN to connect to the headset - usually 0000 or 1234 though the docs the headset came with should tell you this . If you've entered the right pin it should then show something like "connected: logitech headset blah blah blah"... that should be just about that

[Dis]

yeah I finally found the instructions. They had fallen on the floor. It's only 1 page.

It wasn't enough to just turn it on (which requires holding the power button down like 3 seconds). I had to put it in link mode which requires holding the power button down 6 seconds.

I'm not sure I like my new Razr phone though. I went through my batter in 1 8 hour shift. I talk alot on the phone at work. And it just ate through my batter. I may go back to my ancient Nokia. And it is ancient. It doesn't have polyphonic sound or anything.

[unleavened]

1. Activate iPAQ's Bluetooth device

2. Configure mPhone with Bluetooth port

3. Run like mad

[Provost Harrison]

Do you have a dongle Dis?

[Spaced Cowboy]

Dis you can charge your phone on any usb port as long as you have the usb charging driver installed for the razr.

Also cvs sells this hand crank led flashlight thingie that will charge it really quick.

You should be getting quite a bit of talk time out of it. I throw mine on the charger about once a week, but I'm not on it all the time.

[Datajack Franit]

Return the stuff and communicate via tin cans connected by nothing