Announcement

**Coflek** · December 27, 2000, 07:25

I have just posted this in Wes's thread. - I can send you my saved game this evening (UK- time)if you want.

This morning when i tried to open the saved game, it loadead almost fully, and than crashed just before the end of the loading. This happened twice. The error said: CTP2 caused an invalid page fault in module ... and than it listed registries etc...

After that i tried to start a new MED Mod II game(or a new game, I am not sure anymore) and than CTP2 listed as the empire name - 'BADSTRING' - and as the leader name junkstring_DESCRIPTION ... the other butons were OK...

Than i left, when i get back from work this evening, I will try and see, perhaps I will have to reinstall MED MOD II or even CTPII

**skorpion59** · December 27, 2000, 07:51

Yes, please send me the save game when you can.

A couple of questions though.
Did you shut down and restart windows between each of the failed attempts at loading and did you happen to try to load the MedModII scenario and then go back and load the saved game?

Oh, and since I am getting games from both Harlan and Wes' scenarios please specify which scenario it came from in the email. It would help quite a bit.

Thanks for your help

**Coflek** · December 27, 2000, 08:20

As i remember, I saved last night and shut down.

This morning i went first to load the game, and than load the saved game... The computer crashed, after that I tried to go and load once more... crash.. than I went to try and start -i think now- a new MED MOD II scenario game - and I have seen that BADSTRING etc... as empire name...

BTW... The computer actually made autosave in another folder... not where my original saved game was.(maybe this is a feature with CTP2 1.11)

**skorpion59** · December 27, 2000, 16:40

Thanks, I got it and will look at it. If you think of anything else or learn something new please pass it along.

FYI, there also is a bug with the autosave. From other forum posts, I am assuming it was introduced with the new patch. I am not 100% sure because I never paid that much attention before applying the patch.

When autosave works correctly, it will create a new directory with the same name as your save game directory but using only the first 5 digits. When you start a new game, before you do anything at all, this directory and the autosave file will appear. To find out if it is working correctly, go to save a game as soon as your new game starts. You should see the directory BEFORE you save your game.

**skorpion59** · December 27, 2000, 16:55

Great Dane (and others)

What exactly do you mean by second save? Sorry but I can not reproduce the problem myself so I have to count on others info and files. The more detailed, the better it is.

Do you mean you started a game, played a while, saved the game, exited CtP2, came back later, started CtP2, loaded that saved game, played a while, saved the game again, exited CtP2, came back later, started CtP2, tried to load the second game you had saved and it abended?

With scenarios in general, how you do something and in what order you do them is very important. Also, any time you get an error, shut down and restart windows before going back into CtP2.

**Coflek** · December 27, 2000, 17:27

Just to let you know, now I started a standard new game, and everything is fine, i played 59 turns, no crash, saved the game in the folder created automatically (for autosave) exited to CTP2, loaded it. - fine. Once again exited completly (shutdown CTP2) started again - fine.

I did a couple of moves after loading, just to make sure that it works... so the mistake is definitly within MED MOD II, but the good thing is that it doesn't affect the standard game!!!

**Avalon_Grey** · December 27, 2000, 17:55

Im running 1.1 here, Im telling you heres something wacky in the way its loading the scen info from the save files and what files it uses..

(see my post with the varible names in it under the med mod post)

Skorp are you able to repro it from the save i sent you?
[This message has been edited by Avalon_Grey (edited December 27, 2000).]

**Coflek** · December 27, 2000, 20:08

I have done some more playtesting this evening, started a new game, played eighty turns and here are the results regarding the save error.

1. it is different from the error I had in the previous game.

2. It comes with the second save of the game, regardless if you save and go straight to CTP2 (to start a new game) or if you save exit CTP'2 completly and than start CTP2, load the game - it crashes again.

The error message is the same 'GU104.spr not found in asset tree' fault.

It doesn't seem to do anything with the extra folder created by autosave... i tried to save the standard game in that extra folder and it works fine, as well as saving the second save in the quicksave folder - still corrupt.

Scorpion I have now three corrupted save files and five working ones, the three corrupted ones are created a turn after one of the working saves, so if you want any of them I can send.

**GreatDane** · December 28, 2000, 05:07

[quote]Originally posted by skorpion59 on 12-27-2000 03:55 PM
Great Dane (and others)

What exactly do you mean by second save? Sorry but I can not reproduce the problem myself so I have to count on others info and files. The more detailed, the better it is.

Do you mean you started a game, played a while, saved the game, exited CtP2, came back later, started CtP2, loaded that saved game, played a while, saved the game again, exited CtP2, came back later, started CtP2, tried to load the second game you had saved and it abended?

Yes, that is right. The funny thing is that all the games I had saved even the one i loaded the first time (which worked) does not work anymore. I can start a new scenario up and load the game from there but then the messages turn weird. I noticed that the game does not load the scenario files before it loads the game as it did the when it all worked. I think that is the problem.

btw. running v. 1.1

hope this helps.

**Avalon_Grey** · December 28, 2000, 08:46

Looks like both the GPF the .SPR and the message bug are all consistant at this point, would actvision be able to comment or since where modding where in the un-supportable area?

Cause to me it sounds like the way the tree loads in on a mod is not happening on the second save, some form of corruption occurs, but then again i know so little about this.

**skorpion59** · December 28, 2000, 10:08

I have got all the files and been able to reproduce the SPR errors. That and your continuing input helps out quite a bit so I would like to say Thanks. And please continue.

Fortunately (or rather unfortunately), I am now able to produce the errors in my own games so that will also give me some more insight. Must be that CtP2 virus which replecates and spreads itself via the saved files.

There has been discussion about trying to involve Activision. I don't know how successful that would be since they don't actually support scenarios. At the moment, most are gone for the holidays any way. If it keeps going in the direction it looks like, I am sure they will get bombarded regardless.

A couple of things. Keep your leaders first names to at least 6 characters and see if this will fix the autosave and save file in the same directory problem. It fixes it for me (but I also delete the whole directory structure related to my leader before I start a brand new game). And second, always reboot windows after you get an error in CtP. (Yes, I harp on this but it keeps the problem from compounding on itself).

Again, Thanks.

[This message has been edited by skorpion59 (edited December 28, 2000).]

**Pintello** · December 28, 2000, 10:35

Hi All,

I have been play testing Med Mod II and I have not experienced the saved game problems. I am able to save a scenario game and then shut down the computer and come back later and load it with no problems and then continue using it.

A couple things about my setup. 1) I am using Windows 2000 sp1 on a K-6 233 with 64mb RAM. 2) I am using CTP2 patch 1.1, I did not need to use patch 1.11. 3) My leader name is Belisarius and I am playing the Byzantine Empire.

I notice a couple of things here that may have some affect on my game that results in the problem I am not experiencing. Those things are the patch I am using, the operating system I am using, and the fact that the leader name is over the 6 character minimum that skorp recommends.

Hope some of this helps.

Regards,
Timothy Pintello

**Avalon_Grey** · December 28, 2000, 14:08

Ok just incase we need it..

OS Win98SE fully patched all drivers up to date
DX 8.0
TNT2
SB Live!
CTP2 1.1 American release
My Emperor name was Ava in this case

I do not delete the save tree prior..

**Coflek** · December 28, 2000, 15:04

Win 98
DX 8.0
Ati Radeon
ctp2 1.11

Emperor Augustus was the name
[This message has been edited by Coflek (edited December 28, 2000).]

Announcement

GU???.Spr Errors

GU???.Spr Errors

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment