Tweet
Our mIRC Channel
#VoxControli
Step 1 :
Connect to the Apolyton server.
Explanation here:
Step 2 :
type :
/nick your_nickname
example :
/nick Eli
Try to keep the nickname as similar to your Apolyton username as possible, to avoid confusion.
Step 3 :
Register your username :
The channel access is restricted only to registered members whose names I add to the access list. So when you register them, let me know and i'll add you to the access list.
Step 4 :
Type:
/join #VoxControli
or
/j #VoxControli
NOTE:
When you connect to the server again you'll have to authorize your nickname:
/msg NickServ IDENTIFY password
Example :
/msg NickServ IDENTIFY pwblablapw
(you might need to do step 2 first)
After you do this you will be able to join the channel(step 4).
Good luck, and be there during the chats!
Step 1 :
Connect to the Apolyton server.
Explanation here:
Step 2 :
type :
/nick your_nickname
example :
/nick Eli
Try to keep the nickname as similar to your Apolyton username as possible, to avoid confusion.
Step 3 :
Register your username :
Step 1: Register your nickname - Before you can register a channel, you must register your nickname. Here are the steps for registering your nickname.
/msg nickserv info [nickname] - This will check to be sure the nickname you want to register is not already
registered. For example, if I was checking to see if "Alleghany" was registered, I would type: /msg nickserv info Alleghany. If NickServ returns information on the nickname, it is already registered and you need to choose another one. You must be using the nickname you want to register.
/msg nickserv register [password] [username@domain.net] (replacing 'username@domain.net' with your own e-mail address) - For example, if I wanted to register the nickname "Alleghany" using "queen" as the password, I would type: /msg nickserv register queen alleghany@wt.com. You cannot use your nickname as a password, and the password should be something easy to remember. (Hint: WRITE it down and keep it where you can find it!). Note: You MUST use a valid e-mail address.
Examples:
/msg nickserv info BetaHound
/msg nickserv register pwblablapw beta@yahoo.com
/msg nickserv info [nickname] - This will check to be sure the nickname you want to register is not already
registered. For example, if I was checking to see if "Alleghany" was registered, I would type: /msg nickserv info Alleghany. If NickServ returns information on the nickname, it is already registered and you need to choose another one. You must be using the nickname you want to register.
/msg nickserv register [password] [username@domain.net] (replacing 'username@domain.net' with your own e-mail address) - For example, if I wanted to register the nickname "Alleghany" using "queen" as the password, I would type: /msg nickserv register queen alleghany@wt.com. You cannot use your nickname as a password, and the password should be something easy to remember. (Hint: WRITE it down and keep it where you can find it!). Note: You MUST use a valid e-mail address.
Examples:
/msg nickserv info BetaHound
/msg nickserv register pwblablapw beta@yahoo.com
The channel access is restricted only to registered members whose names I add to the access list. So when you register them, let me know and i'll add you to the access list.
Step 4 :
Type:
/join #VoxControli
or
/j #VoxControli
NOTE:
When you connect to the server again you'll have to authorize your nickname:
/msg NickServ IDENTIFY password
Example :
/msg NickServ IDENTIFY pwblablapw
(you might need to do step 2 first)
After you do this you will be able to join the channel(step 4).
Good luck, and be there during the chats!
Comment