Results 1 to 15 of 15

Thread: Alpha Centauri on Vista 64 SP2

  1. #1
    Soran
    Settler
    Join Date
    17 Nov 2005
    Posts
    7
    Country
    This is Soran's Country Flag
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Local Date
    May 26, 2013
    Local Time
    03:36

    Alpha Centauri on Vista 64 SP2

    Hi,

    I have tried the suggestions from the older threads, but they don't seem to help. I am hoping perhaps someone would have other suggestions.

    What I am trying to do is to get SMAX to run on Vista SP2. Here is what happens:

    - no problem with installation from planetary pack CD at all
    - no problem with patch to SMAX 2.0
    - no problem with XP/2000 compatibility patch

    So far so good. Now, when I run terranx.exe "as administrator", the splash screen with the needle jet appears, there is some activity in the CD drive, and then the program silently quits.

    When I try running SMAC by running terran.exe "as administrator", the screen blinks and it quits silently. No splash screen, no CD activity.

    In both cases, the game doesn't get far enough to create the configuration file "alpha centauri.ini". I have downloaded a copy and put it in the game directory anyway, and included

    ForceOldVoxelAlgorithm=1
    DirectDraw=0

    I have tried fiddling with the different compatibility mode settings, as well as the Microsoft Application Compatibility Manager. They don't seem to make any difference.

    I don't have any computer running XP here anymore, so it would be a real shame if it wouldn't run on Vista 64.

  2. #2
    Petek
    King Petek's Avatar
    Join Date
    28 Jul 2000
    Location
    Berkeley, CA
    Posts
    1,071
    Country
    This is Petek's Country Flag
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Local Date
    May 25, 2013
    Local Time
    20:36
    Howdy Soran!

    Welcome to Apolyton. It sounds like you've tried most of the tips in this post, but have a look anyway. Also, you might try uninstalling, applying SMAC patch 4.0, then the XP/2000 compatibility patch, and then SMAX 2.0. Our FAQ suggests that SMAC 4.0 isn't necessary, but it might be after all. Finally, if none of these suggestions help, try a fresh install with SMAC 4.0 and SMAX 2.0, but not the XP/2000 compatibility patch. In some cases the compatibility patch hurts rather than helps. Please post again if none of these suggestions help.

    Petek
    "The avalanche has already started. It is too late for the pebbles to vote."
    -- Kosh

  3. #3
    Soran
    Settler
    Join Date
    17 Nov 2005
    Posts
    7
    Country
    This is Soran's Country Flag
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Local Date
    May 26, 2013
    Local Time
    03:36
    Thanks for the reply. I will try to include as much detail as I can, hopefully this information will be useful to someone else as well.

    Code:
    Platform: Windows Vista 64 SP2 Business
    
    1. Unpatched Planetary Pack Install
    
    Most attempts end with the game silently quit after showing the splash screen and CD drive activity.
    alpha centauri.ini is not generated.
    
    terran.exe and terranx.exe "run as administrator".
    
    Compatibility Mode
    Vista                           splash + CD + silently quit
    Windows 95                      terran.icd has stopped working
    Windows 98/ME                   terran.icd has stopped working
    Windows NT4 SP5                 please insert correct CD
    Windows 2000                    splash + CD + silently quit
    Windows XP SP2                  splash + CD + silently quit
    Windows Server 2003 SP1         splash + CD + silently quit
    
    2. Planetary Pack + SMAC 4.0 patch
    
    Most of the time the game silently quits. alpha centauri.ini is not generated.
    
    terran.exe "run as administrator".
    
    Compatibility Mode
    Vista                           silently quit
    Windows 95                      terran.exe has stopped working
    Windows 98/ME                   terran.exe has stopped working
    Windows NT4 SP5                 silently quit
    Windows 2000                    silently quit
    Windows XP SP2                  silently quit
    Windows Server 2003 SP1         silently quit
    
    3. Planetary Pack + SMAX 2.0 patch
    
    Most of the time the game silently quits after showing the splash screen and CD drive activity.
    alpha centauri.ini is not generated.
    
    terranx.exe "run as administrator".
    
    Compatibility Mode
    Vista                           splash + CD + silently quit
    Windows 95                      terranx.icd has stopped working
    Windows 98/ME                   terranx.icd has stopped working
    Windows NT4 SP5                 please insert correct CD
    Windows 2000                    splash + CD + silently quit
    Windows XP SP2                  splash + CD + silently quit
    Windows Server 2003 SP1         splash + CD + silently quit
    
    4. Planetary Pack + SMAC 4.0 patch + SMAX 2.0 patch + XP compatibility patch
    
    Most of the time the game silently quits after showing the splash screen and CD drive activity.
    alpha centauri.ini is not generated.
    
    terran.exe "run as administrator".
    
    Compatibility Mode
    Vista                           silently quit
    Windows 95                      terran.exe has stopped working
    Windows 98/ME                   terran.exe has stopped working
    Windows NT4 SP5                 silently quit
    Windows 2000                    silently quit
    Windows XP SP2                  silently quit
    Windows Server 2003 SP1         silently quit
    
    terranx.exe "run as administrator".
    
    Compatibility Mode
    Vista                           splash + CD + silently quit
    Windows 95                      terranx.icd has stopped working
    Windows 98/ME                   terranx.icd has stopped working
    Windows NT4 SP5                 please insert correct CD
    Windows 2000                    splash + CD + silently quit
    Windows XP SP2                  splash + CD + silently quit
    Windows Server 2003 SP1         splash + CD + silently quit
    Any thoughts? Does anyone have experience getting it work under Vista 64 or 32? Most of the previous posts did not specify whether they are using 32-bit or 64-bit version of Vista.

  4. #4
    Petek
    King Petek's Avatar
    Join Date
    28 Jul 2000
    Location
    Berkeley, CA
    Posts
    1,071
    Country
    This is Petek's Country Flag
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Local Date
    May 25, 2013
    Local Time
    20:36
    I didn't realize that you had the Planetary Pack (PP). The PP, when installed, patches SMAC to v4.0 and SMAX to v2.0. So the only patch that's not installed is the Win 2K/XP patch. This patch is needed only for SMAC, so if you intend to play only SMAX, it isn't needed (and as I mentioned, some found that the game runs only if this patch isn't installed).

    I found a thread on another forum (post #10) in which someone reported success with installing and playing the game under Vista 64-bit. Here are some other suggestions that have worked in the past:

    1. Disable User Account Control.
    2. Disable anti-virus and anti-malware program(s).
    3. Disable your firewall.

    If none of these work, then I suspect a conflict with your video card or drivers. If necessary, update your drivers and/or try different video settings (resolution, colors, etc.).

    Hope this helps. If not, please post again.

    Petek
    "The avalanche has already started. It is too late for the pebbles to vote."
    -- Kosh

  5. #5
    Soran
    Settler
    Join Date
    17 Nov 2005
    Posts
    7
    Country
    This is Soran's Country Flag
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Local Date
    May 26, 2013
    Local Time
    03:36
    Thanks for your reply, Petek.

    I have done a fresh reinstall of Planetary Pack again to give it another go. I skipped all the other patches this time, and I have turned anti-virus, firewall and UAC off as advised.

    When I launch terranx.exe, the splash screen appears, the CD drive screeches and then the game silently quit. Here is the error that appears in the Event Viewer:

    Faulting application TERRANX.ICD, version 0.0.0.0, time stamp 0x385e91ff, faulting module TERRANX.ICD, version 0.0.0.0, time stamp 0x385e91ff, exception code 0xc0000005, fault offset 0x001f7e90, process id 0x1394, application start time 0x01cabbd6cedb7608.

    The video card driver is up-to-date, and Vista is fully-patched.

    I have tried running at 1024x768 at 16-bit colours as well, same thing. The video card is Nvidia Quadro FX 570M.
    Last edited by Soran; March 4, 2010 at 15:39.

  6. #6
    Soran
    Settler
    Join Date
    17 Nov 2005
    Posts
    7
    Country
    This is Soran's Country Flag
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Local Date
    May 26, 2013
    Local Time
    03:36
    Just for the heck of it, I tried running terranx.exe in safe mode as well, mainly to rule out video card driver incompatibility. The game crashes just like before, with the same error in error log.

  7. #7
    Petek
    King Petek's Avatar
    Join Date
    28 Jul 2000
    Location
    Berkeley, CA
    Posts
    1,071
    Country
    This is Petek's Country Flag
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Local Date
    May 25, 2013
    Local Time
    20:36
    In the error message that you posted, I think (but am not certain) that it's pointing to a problem with process 1394. Since process ids are dynamic (i.e., change over time), generate a new crash, and find the value of "process id 0x????" in the log. Then open Task Manager and look on the Processes tab for a PID with that value. If possible, disable the process, reboot, and see what happens. (I recommend disabling the process via the windows interface instead of just killing it in Task Manager, but I don't know how to do so in Vista. If necessary, I can tell you how to do it in XP. It's probably the same or similar.)

    Petek
    "The avalanche has already started. It is too late for the pebbles to vote."
    -- Kosh

  8. #8
    Petek
    King Petek's Avatar
    Join Date
    28 Jul 2000
    Location
    Berkeley, CA
    Posts
    1,071
    Country
    This is Petek's Country Flag
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Local Date
    May 25, 2013
    Local Time
    20:36
    After thinking some more, process 1394 is probably the ID assigned to SMAX. If so, you won't find it in Task Manager and so it won't be of any help.

    Petek
    "The avalanche has already started. It is too late for the pebbles to vote."
    -- Kosh

  9. #9
    Soran
    Settler
    Join Date
    17 Nov 2005
    Posts
    7
    Country
    This is Soran's Country Flag
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Local Date
    May 26, 2013
    Local Time
    03:36
    Yeah, I am pretty sure the process ID including in the error log corresponds to SMAX.

  10. #10
    Petek
    King Petek's Avatar
    Join Date
    28 Jul 2000
    Location
    Berkeley, CA
    Posts
    1,071
    Country
    This is Petek's Country Flag
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Local Date
    May 25, 2013
    Local Time
    20:36
    Well, not too many more ideas.

    1. Does your system have any non-standard hardware devices? If so, you could disable them and see if that has any effect.

    2. I know that you booted into safe mode. Have you used msconfig? That may allow you to disable more services to see if one of them is causing a conflict.

    3. Perhaps this is a DirectX problem. I seem to recall that Vista uses version 11, but that it's possible to install v10, and also keep v11. If so, that might be worth trying.

    Petek
    "The avalanche has already started. It is too late for the pebbles to vote."
    -- Kosh

  11. #11
    Soran
    Settler
    Join Date
    17 Nov 2005
    Posts
    7
    Country
    This is Soran's Country Flag
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Local Date
    May 26, 2013
    Local Time
    03:36
    Thanks again for your reply, Petek.

    This is probably a dumb question, but how do you keep different versions of DirectX in the same OS installation? How can I find out whether I already have multiple versions of DirectX installed already?

    When I ran dxdiag, it says DirectX 11 is installed.

  12. #12
    Petek
    King Petek's Avatar
    Join Date
    28 Jul 2000
    Location
    Berkeley, CA
    Posts
    1,071
    Country
    This is Petek's Country Flag
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Local Date
    May 25, 2013
    Local Time
    20:36
    I must've been thinking of something else. Google seems to show that DirectX 11 incorporates earlier versions and selects the appropriate one. Anyway, I have one other suggestion. It's not supposed to be discussed openly on this board, so I'll send you a PM. It probably won't help, but there's always a chance.

    Petek
    Last edited by Petek; March 9, 2010 at 12:39. Reason: Correct typo
    "The avalanche has already started. It is too late for the pebbles to vote."
    -- Kosh

  13. #13
    Soran
    Settler
    Join Date
    17 Nov 2005
    Posts
    7
    Country
    This is Soran's Country Flag
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Local Date
    May 26, 2013
    Local Time
    03:36
    For future reference, the issue is still outstanding. If anyone has success getting SMAX running on Vista 64 SP2, we would love to hear your experience.

  14. #14
    scient
    Warlord scient's Avatar
    Join Date
    13 Feb 2009
    Posts
    150
    Country
    This is scient's Country Flag
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Local Date
    May 25, 2013
    Local Time
    22:36
    The problem is ancient copy protection on newer system. I had same problem on win7 x64 (close enough to vista x64) where ACX wouldn't start. Recommendation is to find no cd with protection removed (still need cd in drive or mount disc image) or snag unofficial patch which also has protection removed.

  15. #15
    Petek
    King Petek's Avatar
    Join Date
    28 Jul 2000
    Location
    Berkeley, CA
    Posts
    1,071
    Country
    This is Petek's Country Flag
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Local Date
    May 25, 2013
    Local Time
    20:36
    @scient,

    Soran tried the unofficial patch (info was exchanged via PMs), but it didn't help.

    Petek
    "The avalanche has already started. It is too late for the pebbles to vote."
    -- Kosh

Similar Threads

  1. Replies: 1
    Last Post: April 10, 2010, 07:19
  2. Alpha Centauri IRL
    By Jeje2 in forum Alpha Centauri
    Replies: 21
    Last Post: May 29, 2008, 09:04
  3. Alpha Centauri and Vista
    By I_pity_the_fool in forum Alpha Centauri
    Replies: 4
    Last Post: December 16, 2007, 22:23
  4. Alpha Centauri 2?
    By Securion in forum AC-General/Help/Strategy-Archive
    Replies: 13
    Last Post: July 29, 2001, 04:39

Visitors found this page by searching for:

alpha centauri vista patch

terranx.exe has stopped working

terran.exe has stopped working

terran.icd has stopped working

alpha centauri windows 7 color

alpha centauri terran.exe

site:apolyton.net alpha centauri scenario freezes at start of turn

alpha centauri wont install vista

alpha centauri windows 7 64bitalpha centauri game vistaalpha centauri no cdterran.exe has stopped working windows 7alpha centauri terran.exe crashterranx has stopped workingsid meiers alpha centauri windows 7alpha centauri for vistaalpha centauri planetary pack windows 7sid meiers alpha centauri has stopped workingterranx.exe no cdalpha centauri on vistaalpha centauri inialpha centauri vista 64alpha centauri windows 7sid meiers alpha centauri windows 7 64 bitalpha centauri install vista

Bookmarks

Posting Permissions